Stone Chip Protection & Clear Wraps


We are Vehicle Stone Chip Protective Clear Wrap Specialists.

3M™ VentureShield™ Paint Protection Film

3M™ VentureShield™ Paint Protection Film is the cost effective choice for vehicle protection. The tough properties of this film will protect the most vulnerable painted surfaces of your vehicle.

  • Professionally installed, computer designed kits ensure perfect fit.
  • Virtually clear film eliminates stone ships, scratches and paint damage.
  • Optional 60" film allows full hood or whole vehicle coverage.
  • Perfect for bumper covers, door pull cavities, side mirrors, hoods, door edges, trunk ledges and rocker panels.

  • 3m-ventureshield-stone-chip-protection-clear-wrapping

    3M™ VentureShield™ Paint Protection Film 7510CC/CS-LD is a 6.4 mil (163 micron) clear-coated urethane film, coated with a clear acrylic pressure sensitive adhesive (PSA). The film is specifically designed for surface protection of painted, gel coated or other surfaces with aesthetic requirements. The film helps protect from stone chips, scratches, bug damage, road tar stains and automotive fluid stains, as well as punishing outdoor weathering. VentureShield Paint Protection Film 7510 CC/CS-LD applies easily and maintains its clarity, durability and superior performance over a wide range of environmental conditions.


  • High performance surface protection film is ideal for use on painted or unpainted materials, gel coat, fiberglass or other smooth surfaces.
  • Cuts and installs easily.
  • Maintains clarity, guaranteed not to crack with UV or salt spray exposure.
  • Excels in high heat and humidity environmental conditions.

  • 3m-ventureshield-stone-chip-protection-clear-wrapping

    3M VentureShield™ Films

    3M™ VentureShield™ virtually eliminates the risk of stone chips, scratches and paint damage to your car, while helping to retain its residual value. Made from optically clear, extremely tough urethane film, a digitally-designed, bespoke template for your car will be fitted by specially-trained installers, to achieve the protection you need for your bumpers, headlights, wings, wing mirrors and bonnet. You can even choose to have your whole car covered for total peace of mind. Motorbike kits are designed for a DIY fit at home. Contact one of our trained and approved installers now for more information and a quote.

    Cars, Vans & Most Vehicle Types

    We've been designing templates and manufacturing VentureShield for many years, so we have a great understanding of vehicle contours, and we can produce a templates for any vehicle with optimal coverage and protection. Whether you want standard coverage to protect the most vulnerable areas of your car from damage, extended coverage to fully wrap your bonnet for improved aesthetics, or even full vehicle coverage for ultimate car paint protection, we have a protective film solution for you. Our dedicated template engineers produce bespoke designs for each make and model of vehicle as soon as they hit the road, helping you to have total peace of mind, knowing that the kit will fit perfectly first time, with no cutting of the film on the car needed. 

    We only sell VentureShield through a national network of trained and approved installers, so you can have confidence in the standard of work they carry out. Whether on a supermini, family hatchback or supercar, the level of care and attention that they deliver is second to none. Contact your nearest Approved Installer now for more information.


    As opposed to car kits, which have to be professionally installed due to their complexity and size, bike kits are specifically designed to be DIY fit and easy to install. The areas they cover are generally quite small, so there is much less complexity in the shapes and contours they fit around. The coverage still means you get optimum protection against chips and scuffs but you benefit from reduced cost, being DIY fit. Most makes and models of bike since 2000 have a specific template already designed and we continue to produce new ones each week. We try and get hold of press bikes or demo bikes, so we can see each and every area that gets damaged and then make a corresponding template.

    With the increasing popularity of matte paint finishes, we also have a matte film, so that you get the same levels of protection but are able to maintain the matte finish of the bike. Contact one of our approved installers to find out how you can purchase a DIY motorbike kit for your motorbike. approved installers


    Taking part in motorsports means higher speeds for your car or motorbike, with more debris and potential for surface damage, which can be costly to repair, especially on carbon fibre panels. VentureShield is tested and used at the pinnacle of 2 and 4 wheel motorsport and has a race-proven heritage all around the world. Whether you want to protect the sponsor’s logos from getting damaged, or stop debris from taking chunks out of carbon fibre panels, VentureShield will ensure you’re on the track for longer, rather than in the paintshop.

    We only sell VentureShield through a national network of trained and approved installers, so you can have confidence in the standard of work they will carry out. Whether on a supermini, family hatchback or supercar, the level of care and attention that they deliver is second to none. Contact your nearest approved installers now for more information.

    Other uses

    When you have a need for surface protection, chances are you need VentureShield. It's used on pleasure boats and super yachts to prevent abrasion from fenders and ropes, as well as being applied around the scum line to prevent unsightly stains on the hull, and make cleaning easier.

    VentureShield is also used on mobile phones, sports equipment, watches, ski helmets, wake boards, jet skis, and even surfboards! These are non-standard applications and we probably won’t have a template for it, but by using raw material and making your own template, you can still get the same benefits as standard applications.

    Contact your nearest installer for more information and pricing. They can advise on how much material you’ll need, and the best way to create a template for your specific application.

    Paint Protection Specifications

    Door Edges,‎ Door Handle Cavities,‎ Full or Partial Hoods,‎ Protecting Front Bumpers,‎ Rear Fender Panels,‎ Rocker Panels,‎ Side Mirrors,‎ Trunk Ledges

    COLOUR: Clear/Transparent

    Thermoplastic, polyurethane film with pressure sensitive adhesive designed to adhere to automotive paint systems

    *Professional installation by a certified 3M Installer.

    12 Inch,‎ 18 Inch,‎ 24 Inch,‎ 30 Inch,‎ 36 Inch,‎ 48 Inch

    5 year limited

    Download Technical Data Sheet
    Download Vehicle Owner Care Instructions and Warranty

    VEHICLE GALLERY WRAP COLOURS & SPECS Graphics & Wraps [Price Guide]

    Get A QUOTE today.

    Please use the form below, should you need to add attachments then email:
    Or give us a call on: 01903 505224. No obligation, and absolutely no pressure.




    Website Design & Hosting by It's a Wrap UK

    Swagger and Strut - Walk your Walk - Australian Lifestyle Apparel

    NRG Drive - Luxury Driving Tours

    Advertise with us!

    With an average of over 35,000 unique visitors every single month, it's a great opportunity to get your business, service or product seen without
    a huge outlay.
    You can have an image, video, text and link direct to your website.

    To advertising call 01903 505224 or email for further information.
    email us:

    Quick View Info

    Vehicle Wrapping Prices - Vehile Signwriting Price Guide

    Price Promise - It's a Wrap UK


    Authorised Vehicle Wrapper, Fully Certified (3M AVW). Trained in the application of 3M Graphic Products & Films.

    Its a Wrap UK - Vehicle Wrapping and Graphics It's a Wrap ©. (Logos, imagery & site content are under protection of copyright law with agency certification) | Privacy Policy | T&C's | Vehicle T&C's | Email: | Telephone: 01903 505224